top of page

Rubio Monocoat Oil Plus 2C is a 2-component oil finishing system, consisting of Rubio Monocoat Oil Plus (A) and Accelerator (B) that is very suitable for indoor applications which require quick curing and superior protection.

 

 

  • Enhances the natural look and feel of the wood.

  • 0% VOC, does not contain any water or solvents.

  • Minimal use: 30 - 50 m²/L (300 - 500 ft²/L.)

  • Can be applied to all wood types.

  • Fit for light use in 24 hours.

  • Very fast curing: 80% in 2 days.

  • A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.

 

Certificates

  • Eurofins Indoor Comfort Gold Label

  • GreenGuard Label

  • A+ Label

  • Ü Label – DiBt

  • 0% VOC

  • Toy standard EN 71-3

  • M1

 

 

RMC Oil Plus 2C Set (Comp. A + B) Standard Colours

SKU: 364215376135191
$265.00Price
  • Preparation of Surface

    • Always begin with a wood surface that has been sanded to bare wood; all previous finishes must be completely removed.
    • We recommending sanding to a maximum of 120 grit.
    • Make sure texture of the sanded surface should be uniform and show no evidence of scratches before vacuuming as much of the dust off as possible.
    • Lastly, clean the surface with the RMC Cleaner to remove all dust and to prepare the wood surface to receive the RMC Oil Plus 2C


    Application

    • Start by mixing 3 parts of Component A (the wood oil) with 1 part of Component B (the accelerator) thoroughly. 
    • Then using a rag, sponge, buffing pad or squeegee, spread the mixed RMC Oil Plus 2C evenly onto your wood surface.
    • Allow to sit for approx. 5 minutes for the oil to soak and react
    • Buff off the excess oil with a clean rag or buffing pad
    • Allow to cure for 24 hours before light use

     

    Clean up

    • Equipment can be cleaned with RMC cleaner
    • Rags, sponges or buffing pads should be soaked in water before discarding to prevent unwanted fire hazards.
bottom of page